भगवान शिव को विनाशक क्यों कहा जाता है / why lord shiva is called as destroyer

चित्र
 आप सब ने कई बार लोगों को कहते हुए सुना होगा की ब्रह्मा जी इस सृष्टि को बनाते है भगवान विष्णु उसकी रखवाली करते है और भगवान शिव उसका अंत करते है और इसी कारण से लोगों ने भगवान शिव को विनाशक का दर्जा दे दिया और सभी लोग उन्हें ऐसा दिखाते है की बस वे सभी चीज़ों को मिटने का ही काम करते है | वोह तोह बहुत दयालु है आशुतोष है जो बहुत जल्दी प्रसन्न हो जाते है, इसलिए यह जानना बहुत ज़रूरी है की उन्हें विनाशक क्यों कहा जात है |  भगवान शिव को विनाशक इस लिए कहा जाता है क्योंकि वोह इस ब्रह्माण्ड का विनाश करेंगे जो की सही है ऐसा होगा मगर ऐसा नहीं है की भगवान शिव को ऐसा करने में मज़ा आता है या फिर उन्हें अच लगता है और इसी काम को करने के लिए उन्हें नियुक्त किया गया है | जब ब्रह्मा जी इस सृष्टि को बना रहे थे तब उन्होंने काफी उर्जा लगा दी थी इसे बनाने में और जब कलियुग ख़तम हो जायेगा और फिर से इस ब्रह्माण्ड को नए सिरे से बनाना पड़ेगा क्योंकि यह दुनिया दुबारा रहने लायक बचागी ही नहीं क्योंकि आप सब को पता है की कोई भी चीज़ हमेशा के लिए नहीं होती | दुनिया में पानी कहातम हो ही चूका है और हवा भी खराब हो चुकी है...

What about your motherboard and audio?


Unless you’re a serious audiophile, you happen to get faulty hardware, or you opt for the lowest-end motherboard possible while still expecting exquisite sound, you should get by with on-board audio these days just fine.

Motherboard audio quality is primarily defined by the audio codec (aka the audio processing chip) a given board uses. So, if you’re a stickler for sound quality, you can look up the codec a given board uses before buying and see if it’s a mid-range or high-end model. Alternatively, you can, of course, still opt for a dedicated sound card, or USB speakers that move the DAC (digital-to-analog converter) hardware outside of the PC altogether, like the Audioengine A2+.

What extra features do you need?

Given the sheer number of features that board makers sometimes slap on motherboards--particularly high-end models--it’s impossible to discuss them all. But here are a few to keep an eye on:

On-board on/off switches: These can be handy in the initial build process, or if your system is being housed in an open case for benchmarking/component testing. But for the average user, on-board buttons (which sometimes also include buttons to clear the CMOS or do basic overclocking) aren’t necessary.

LED diagnostic readouts: The tiny speaker that plugs into motherboard headers to provide diagnostic beeps when something goes wrong is going the way of the dodo. In its place, many mid-to-high-end boards now include a two-or-three-digit display for the same purpose, giving you an alpha-numeric code when something goes wrong. This can be a real help when building a PC or upgrading and you either forget to plug something in, something isn’t seated properly, or one of your components turns out to be faulty.

My youtube channel

https://www.youtube.com/channel/UCL_u9BMXRNEZR_SjoKUj1Fw

टिप्पणियाँ

इस ब्लॉग से लोकप्रिय पोस्ट

How Much Can You Spend On Graphics Card?

Successful banne ka ek formula

भगवान की पूजा क्यों होती है / Why Do We Praise God